{"title":"Fluidampr","description":null,"products":[{"product_id":"fluidampr-ford-powerstroke-6-7l-harmonic-balancer-friction-washer-3pc","title":"Fluidampr Damper Friction Washer 3pc 2011+ Ford 6.7L Power Stroke","description":"\u003cp\u003eThree pack of the 0.010 in. diamond impregnated friction washers used between a Fluidampr damper and the crankshaft on 2011+ Ford 6.7L Power Stroke engines. One washer is used per installation, so this pack covers repeat teardowns rather than a single job.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a three washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011 and newer Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr damper p\/n 800221 and High Strength Bolt Kit p\/n 300016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800221-FW03\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 3 pieces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819971956909,"sku":"fdr800221-FW03","price":171.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/50b5f06c3070e4224da7356d9707b8ccL.jpg?v=1783813267"},{"product_id":"fluidampr-2001-gm-chevy-6-6l-duramax-harmonic-balancer-friction-washer-3pc","title":"Fluidampr Damper Friction Washer 3pc 2001+ GM 6.6L Duramax","description":"\u003cp\u003eBulk three pack of the 0.010 in. diamond impregnated friction washer for 2001+ GM 6.6L Duramax Fluidampr damper installations. Shops that pull a damper more than once will use one washer per install.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a three washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2001 and newer GM \/ Chevy 6.6L Duramax\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr Duramax dampers and High Strength Bolt Kit p\/n 300010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 760131-FW03\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 3 pieces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819971989677,"sku":"fdr760131-FW03","price":171.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/146214e8af6b244cf9b66447aaf2b177L.jpg?v=1783813269"},{"product_id":"fluidampr-19-22-gm-chevy-duramax-l8t-steel-externally-balanced-damper","title":"Fluidampr Internally Balanced Damper GM 6.6L L8T 6.2L L87 Gas V8","description":"\u003cp\u003eFluidampr lists this performance damper for GM and Chevy big block gasoline V8 engines, covering the 6.6L L8T and the 6.2L L87. It replaces the stock harmonic balancer with a viscous unit and, per Fluidampr, is internally balanced.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInternally balanced per Fluidampr specification.\u003c\/li\u003e\n\u003cli\u003ePre-drilled and tapped 3.200 in. bolt circle with six 3\/8 in.-16 holes, which accepts a custom mandrel for accessories such as a dry sump drive.\u003c\/li\u003e\n\u003cli\u003eRemovable rear-mounted aluminum A\/C pulley.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003e7-3\/4 in. diameter, 14.9 lbs. SFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGM \/ Chevy 6.6L L8T gasoline V8\u003c\/li\u003e\n\u003cli\u003eGM \/ Chevy 6.2L L87 gasoline V8\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003cli\u003eL8T vehicle applications include 2019-2022 Silverado 1500 and Sierra 1500, 2020-2022 Silverado 2500 \/ 3500 and Sierra 2500 \/ 3500, 2021-2022 Tahoe, Suburban, Yukon, Yukon XL and Escalade, and 2019-2022 Express and Savana vans\u003c\/li\u003e\n\u003cli\u003eNot for the 6.6L Duramax diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eConfirm 5.3L L84 fitment with Fluidampr before ordering for that engine. Verify you have the gasoline L8T or L87 and not the 6.6L Duramax diesel, since the two are different engine families and the dampers are not interchangeable.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 760151\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 7-3\/4 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 14.9 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972055213,"sku":"fdr760151","price":589.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/c346b8be85c8efefb8942ba98a03e8fdL.jpg?v=1783813269"},{"product_id":"fluidampr-1989-dodge-ram-5-9l-6-7l-cummins-harmonic-balancer-friction-washer-3pc","title":"Fluidampr Damper Friction Washer 3pc 1989+ Dodge Ram 5.9L 6.7L Cummins","description":"\u003cp\u003eThree pack of the diamond impregnated friction washer used in Fluidampr Cummins damper installations on 1989+ Dodge Ram 5.9L 6.7L Cummins engines. Fluidampr specifies a new washer each time the damper is removed, so a bulk pack suits repeat competition teardowns.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a three washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1989 and newer Dodge Ram 5.9L and 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eUsed with the Fluidampr Cummins High Strength Bolt Kits and the Cummins Full Power Kit p\/n 300008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 960341-FW03\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 3 pieces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972087981,"sku":"fdr960341-FW03","price":171.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/41936dca691e0df1759ae1c2d1efc57eL.jpg?v=1783813268"},{"product_id":"fluidampr-ford-powerstroke-6-0l-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2003-2007 Ford 6.0L Power Stroke","description":"\u003cp\u003eThe Fluidampr Performance Diesel Series damper replaces the factory elastomer harmonic balancer on the 2003-2007 Ford 6.0L Power Stroke with a viscous crankshaft damper. It is the externally balanced unit for standard single-alternator 6.0L applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eExternally balanced to OEM specification, so no additional crankshaft balancing is required.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eNever requires tuning, rebuilding or maintenance, unlike a rubber elastomer balancer.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2007 Ford 6.0L Power Stroke\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003cli\u003eSingle alternator accessory drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFluidampr specifies routing the accessory belt between the damper and the water pump pulley before the damper is installed. OEM crank bolt torque is 50 ft-lbs plus an additional 90 degrees; the bolt is torque-to-yield and must be replaced. The High Strength Bolt Kit, p\/n 300014, is recommended for applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 870201\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel with black zinc chromate finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972120749,"sku":"fdr870201","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/ddfdb50477ecdacc0ed5301f902af180.jpg?v=1783813268"},{"product_id":"fluidampr-dodge-cummins-drill-pin-kit","title":"Fluidampr Damper Drill Pin Kit Dodge Ram 5.9L 6.7L Cummins","description":"\u003cp\u003eFor high performance 5.9L and 6.7L Cummins engines that exceed 3,500 rpm, Fluidampr recommends pinning the damper to the crankshaft. This kit supplies the dowel pin and the tooling needed to drill the crank accurately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUses a 0.0005 in. press fit steel dowel pin, upgraded from the earlier roll pin design.\u003c\/li\u003e\n\u003cli\u003eIncludes a 7.7 mm drill and reamer tool.\u003c\/li\u003e\n\u003cli\u003eDrill fixture included for accurate alignment with the damper's pre-drilled pin hole.\u003c\/li\u003e\n\u003cli\u003eHighly recommended by Fluidampr for drag racing and sled pulling.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 5.9L and 6.7L Cummins with a Fluidampr damper\u003c\/li\u003e\n\u003cli\u003eRecommended above 3,500 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFluidampr states the current dowel pin fitment is not an update path for dampers already installed with the older drill pin kit, because the new pin is smaller and a slight press fit. Pin the damper before installing the Full Power Kit, p\/n 300008, and make sure the pin sits flush or below flush with the damper face.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300002\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper drill pin kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972153517,"sku":"fdr300002","price":80.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/67fa3db3ac4b81fe6b13ca84ba9026e5L.jpg?v=1783813266"},{"product_id":"dodge-cummins-5-9l-6-7l-common-rail-comp-series-no-pulley-harmonic-balancer-damp","title":"Fluidampr Competition Series Damper 5.9L 6.7L Cummins Common Rail","description":"\u003cp\u003eFluidampr built the Competition Series damper p\/n 980301 for 5.9L and 6.7L common rail Cummins engines used in drag racing and sled pulling. At 10-3\/32 in. diameter and 28.8 lbs, it damps more than the standard Performance Diesel design, and it ships without a pulley.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDamper only, no pulley.\u003c\/li\u003e\n\u003cli\u003eRobust one-piece construction with an integrated tone wheel.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003e10-3\/32 in. diameter, 28.8 lbs, internally balanced.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 5.9L and 6.7L common rail Cummins competition engines\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003cli\u003eNo pulley\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eInstall the damper with the smaller of the two pin holes on the crankshaft pin and check crankshaft thread depth before installation. Crank bolt torque is 92 ft-lbs with OEM bolts. Fluidampr recommends the Drill Pin Kit p\/n 300002 and the Cummins Full Power Kit p\/n 300008 with this damper.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 980301\u003c\/li\u003e\n\u003cli\u003eProduct Type: Competition crankshaft damper\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 10-3\/32 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 28.8 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972186285,"sku":"flu980301","price":645.51,"currency_code":"USD","in_stock":true}]},{"product_id":"competition-series-harmonic-balancer-6-bolt-hole-with-1-381-in-center-hole","title":"Fluidampr Competition Series Harmonic Balancer 6-Bolt 1.381in Center","description":"\u003cp\u003eFluidampr Competition Series harmonic balancer with a six bolt hole mounting pattern and a 1.381 in. center hole. Like the rest of the Competition Series, it is a viscous damper built for sustained high torque competition engines rather than a tuned rubber elastomer balancer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix bolt hole mounting pattern.\u003c\/li\u003e\n\u003cli\u003e1.381 in. center hole.\u003c\/li\u003e\n\u003cli\u003eViscous design: a free-rotating inertia ring sealed inside the housing shears through silicone to convert torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eCompetition Series construction with a laser welded one piece housing for durability under high torque and horsepower.\u003c\/li\u003e\n\u003cli\u003eNever requires tuning, rebuilding or maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eMatch the six bolt pattern and 1.381 in. center hole to your hub or crankshaft flange before ordering. Confirm engine application and bolt circle diameter with Fluidampr if you are specifying this damper for a new build.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 1243121\u003c\/li\u003e\n\u003cli\u003eProduct Type: Competition Series harmonic balancer (viscous crankshaft damper)\u003c\/li\u003e\n\u003cli\u003eMounting: 6 bolt holes\u003c\/li\u003e\n\u003cli\u003eCenter Hole: 1.381 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972219053,"sku":"flu1243121","price":975.63,"currency_code":"USD","in_stock":true}]},{"product_id":"fluidampr-ford-powerstroke-6-0l-dual-alternator-steel-externally-balanced-damper","title":"Fluidampr Dual Alternator Damper 2003-2007 Ford 6.0L Power Stroke","description":"\u003cp\u003eBuilt for 2003-2007 Ford 6.0L Power Stroke trucks running dual alternators, this Fluidampr Performance Diesel Series damper carries the wider dual-belt drive while controlling crankshaft torsional vibration. It is externally balanced and is not interchangeable with the standard single-alternator damper.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSized for the 6.0L Power Stroke dual alternator accessory drive.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003e8-7\/8 in. outside diameter, 29.1 lbs total weight with 19.4 lbs rotating weight.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2007 Ford 6.0L Power Stroke equipped with dual alternators\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 50 ft-lbs plus an additional 90 degrees; the bolt is torque-to-yield and must be replaced. Fluidampr recommends the High Strength Bolt Kit, p\/n 300014, for applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 870211\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8-7\/8 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 29.1 lbs (19.4 lbs rotating)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972251821,"sku":"fdr870211","price":948.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/94dcd839f33509b2ef1ecca9644c98efL.jpg?v=1783813267"},{"product_id":"fluidampr-ford-powerstroke-6-0l-harmonic-balancer-friction-washer-1pc","title":"Fluidampr Damper Friction Washer 1pc 2003-2007 Ford 6.0L Power Stroke","description":"\u003cp\u003eFluidampr calls for a fresh diamond impregnated friction washer every time the damper comes off the crankshaft. This is the single 0.010 in. washer for 2003-2007 Ford 6.0L Power Stroke damper installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a single washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2007 Ford 6.0L Power Stroke\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr damper p\/n 870201 and High Strength Bolt Kit p\/n 300014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 870201-FW01\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972284589,"sku":"fdr870201-FW01","price":63.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/6943a53cf253b42cca3db941724a56ccL.jpg?v=1783813268"},{"product_id":"fluidampr-ford-powerstroke-6-4-harmonic-balancer-friction-washer-3pc","title":"Fluidampr Damper Friction Washer 3pc 2008-2010 Ford 6.4L Power Stroke","description":"\u003cp\u003eThree pack of the 0.010 in. diamond impregnated friction washers used between a Fluidampr damper and the crankshaft on 2008-2010 Ford 6.4L Power Stroke engines. One washer is used per installation, so this pack covers repeat teardowns rather than a single job.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a three washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008-2010 Ford 6.4L Power Stroke\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr damper p\/n 800211 and High Strength Bolt Kit p\/n 300015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800211-FW03\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 3 pieces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972317357,"sku":"fdr800211-FW03","price":171.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/36d538fa7cde4cf26bff418ce4405e34L.jpg?v=1783813268"},{"product_id":"fluidampr-6-6l-gm-duramax-2001-2005-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2001-2005 GM 6.6L Duramax LB7 LLY","description":"\u003cp\u003eFluidampr's Performance Diesel Series damper for the 2001-2005 GM 6.6L Duramax LB7 and LLY replaces the factory balancer with a viscous unit that keeps working as power levels rise. It is externally balanced and includes the hardened crankshaft washer used on GM applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eSupplied with a hardened crankshaft washer machined for the GM 3.200 in. bolt circle, replacing the factory crank bolt washer.\u003c\/li\u003e\n\u003cli\u003e8-3\/8 in. outside diameter, 23 lbs total weight with 15.4 lbs rotating weight.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2001-2005 GM \/ Chevy 6.6L Duramax LB7 and LLY\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 74 ft-lbs plus an additional 105 degrees; the bolt is torque-to-yield and must be replaced. Fluidampr recommends the Duramax High Strength Bolt Kit, p\/n 300010, at higher power levels and the Duramax Drill Pin Kit, p\/n 300019, for added retention.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 890101\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8-3\/8 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 23 lbs (15.4 lbs rotating)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972350125,"sku":"fdr890101","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/b7e3a0e09396d4e51bdfe2a5c1dc1ab2L.jpg?v=1783813267"},{"product_id":"fluidampr-ford-powerstroke-6-0l-harmonic-balancer-friction-washer-3pc","title":"Fluidampr Damper Friction Washer 3pc 2003-2007 Ford 6.0L Power Stroke","description":"\u003cp\u003eThree pack of the 0.010 in. diamond impregnated friction washers used between a Fluidampr damper and the crankshaft on 2003-2007 Ford 6.0L Power Stroke engines. One washer is used per installation, so this pack covers repeat teardowns rather than a single job.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a three washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2007 Ford 6.0L Power Stroke\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr damper p\/n 870201 and High Strength Bolt Kit p\/n 300014\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 870201-FW03\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 3 pieces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972382893,"sku":"fdr870201-FW03","price":171.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/afedd21b10db72f0d0ccef62318f29b5L.jpg?v=1783813268"},{"product_id":"fluidampr-ford-powerstroke-6-7l-harmonic-balancer-friction-washer-1pc","title":"Fluidampr Damper Friction Washer 1pc 2011+ Ford 6.7L Power Stroke","description":"\u003cp\u003eFluidampr calls for a fresh diamond impregnated friction washer every time the damper comes off the crankshaft. This is the single 0.010 in. washer for 2011+ Ford 6.7L Power Stroke damper installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a single washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011 and newer Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr damper p\/n 800221 and High Strength Bolt Kit p\/n 300016\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800221-FW01\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972415661,"sku":"fdr800221-FW01","price":63.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/eba98f787bfdac87fa1feb3e085705afL.jpg?v=1783813268"},{"product_id":"fluidampr-dodge-cummins-5-9l-2003-2007-steel-internally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2003-2009 Dodge 5.9L Cummins","description":"\u003cp\u003eFluidampr lists p\/n 920301 for 2003-2009 Dodge 5.9L Cummins common rail engines. The damper has an integrated tone wheel, so the factory tone wheel comes off during installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntegrated tone wheel; the OEM tone wheel must be removed before the Fluidampr is installed.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eInternally balanced; no additional crankshaft balancing required.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2009 Dodge Ram 5.9L Cummins\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eInstall the damper with the smaller of the two pin holes on the crankshaft pin, and check crankshaft thread depth for proper bolt length first. Crank bolt torque is 92 ft-lbs with OEM bolts, with minimum thread engagement of 0.750 in. Fluidampr recommends High Strength Bolt Kit p\/n 300007 under 700 hp \/ 1,250 ft-lbs and the Full Power Kit p\/n 300008 above it.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 920301\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eIncluded Feature: Integrated tone wheel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972448429,"sku":"fdr920301","price":756.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/0a532356b426247131bff207aa069e8cL.jpg?v=1783813267"},{"product_id":"fluidampr-dodge-cummins-5-9l-comp-series-no-pulley-steel-internally-balanced-damper","title":"Fluidampr Competition Series Damper 5.9L Cummins No Pulley","description":"\u003cp\u003eThe Competition Series damper is Fluidampr's race-only Cummins unit, supplied without a pulley so no accessory belt can be driven from it. Fluidampr's Performance Diesel installation chart lists p\/n 960341 as an internally balanced Competition Series damper for Dodge Cummins 5.9L \/ 6.7L applications, and distributors commonly catalog it for 5.9L race engines.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompetition use only; no pulley and no accessory belt drive.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eInternally balanced, one-piece construction.\u003c\/li\u003e\n\u003cli\u003eLarger inertia mass than the standard Performance Diesel damper for higher torque engines.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDodge Cummins 5.9L competition engines\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003cli\u003eNo pulley - competition use only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eCrank bolt torque is 92 ft-lbs with OEM bolts. Fluidampr recommends the Cummins Full Power Kit p\/n 300008 above 700 hp \/ 1,250 ft-lbs and the Drill Pin Kit p\/n 300002 above 3,500 rpm. Confirm the exact application with Fluidampr before ordering for a specific build.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 960341\u003c\/li\u003e\n\u003cli\u003eProduct Type: Competition crankshaft damper\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003ePulley: None\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972481197,"sku":"fdr960341","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/59ac6436888a0b066403c2be0250d6d2L.jpg?v=1783813268"},{"product_id":"fluidampr-universal-tractor-pulling-internally-balanced-damper-w-o-pre-drilled-bolt-holes","title":"Fluidampr Competition Tractor Pulling Damper Undrilled Taper Lock Hub","description":"\u003cp\u003eThis is the undrilled version of Fluidampr's Competition Series tractor pulling damper. It arrives without mandrel bolt holes so an engine builder can drill the flange to suit a specific setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo mandrel bolt holes; drilling is required to suit your mandrel or drive.\u003c\/li\u003e\n\u003cli\u003eUniversal fit for taper lock hubs, supplied without a pulley.\u003c\/li\u003e\n\u003cli\u003eInertia mass roughly 10 percent greater than the standard design, with additional internal components for greater thrust loads.\u003c\/li\u003e\n\u003cli\u003eThicker steel and a laser welded single piece housing, with clockwise and counter-clockwise laser engraved timing marks.\u003c\/li\u003e\n\u003cli\u003e12-3\/8 in. diameter, 37 lbs. SFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUniversal fit for tractor pulling engines using a taper lock hub\u003c\/li\u003e\n\u003cli\u003eCompetition use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eMandrel bolt hole drilling is required. A taper lock hub is needed and is not included. Never drill into the damper housing itself, as the inertia ring and silicone are in a sealed housing.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 1243111\u003c\/li\u003e\n\u003cli\u003eProduct Type: Competition crankshaft damper\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 12-3\/8 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 37 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972513965,"sku":"fdr1243111","price":1080.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/e737eed891d71a2331b02937ab3ae22cL.jpg?v=1783813267"},{"product_id":"fluidampr-ford-6-0l-powerstroke-8in-duel-belt-5-and-7-rib-pulley-for-alternator","title":"Fluidampr Dual Alternator Pulley 2003-2007 Ford 6.0L Power Stroke","description":"\u003cp\u003eThis is the accessory pulley used with a Fluidampr damper on dual alternator 2003-2007 Ford 6.0L Power Stroke trucks. It bolts to the damper and drives either belt width used in these setups.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWorks with a 5 rib or a 7 rib belt.\u003c\/li\u003e\n\u003cli\u003eMachined and balanced, with a zinc coating for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eSold as the pulley only, not a complete damper.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2007 Ford 6.0L Power Stroke with dual alternators\u003c\/li\u003e\n\u003cli\u003eFor use with a Fluidampr Performance Diesel Series 6.0L damper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eConfirm which Fluidampr 6.0L damper you are running before ordering, since distributors list this pulley both as the dual alternator accessory for p\/n 870201 and as the pulley used with the dual alternator damper p\/n 870211.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 717675\u003c\/li\u003e\n\u003cli\u003eProduct Type: Dual alternator crankshaft pulley\u003c\/li\u003e\n\u003cli\u003eBelt: 5 rib or 7 rib\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972579501,"sku":"fdr717675","price":273.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/0ff4fc8f4b892f5ba2fa216e97aeba19L.jpg?v=1783813270"},{"product_id":"fluidampr-universal-tractor-pulling-12-bolt-taper-lock-hub-internally-balanced-damper-w-bolt-holes","title":"Fluidampr Competition Tractor Pulling Damper 12-Bolt Taper Lock Hub","description":"\u003cp\u003eFluidampr developed this Competition Series damper for professional tractor pulling, where engines see sustained high torque. It mounts to a taper lock hub and comes pre-drilled with the 12-bolt mandrel pattern.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 bolt mounting flange evenly spaced on a 4.5 in. bolt circle; requires a taper lock hub with a 3.25 in. pilot.\u003c\/li\u003e\n\u003cli\u003eInertia mass roughly 10 percent greater than the standard design, with additional internal components for greater thrust loads.\u003c\/li\u003e\n\u003cli\u003eThicker steel and a laser welded single piece housing for durability under high torque and horsepower.\u003c\/li\u003e\n\u003cli\u003eClockwise and counter-clockwise laser engraved timing marks; no pulley.\u003c\/li\u003e\n\u003cli\u003e12-3\/8 in. diameter, 37 lbs. SFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUniversal fit for tractor pulling engines using a taper lock hub\u003c\/li\u003e\n\u003cli\u003eCompetition use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eA taper lock hub with a 3.25 in. pilot is required and is not included. This version arrives with the mandrel bolt holes already drilled.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 1243101\u003c\/li\u003e\n\u003cli\u003eProduct Type: Competition crankshaft damper\u003c\/li\u003e\n\u003cli\u003eBolt Pattern: 12 bolt on 4.5 in. bolt circle\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 12-3\/8 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 37 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972546733,"sku":"fdr1243101","price":1080.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/a1ea222d90a9aa9bd7211af10020e768L.jpg?v=1783813268"},{"product_id":"fluidampr-dodge-cummins-5-9l-1992-1998-12v-steel-internally-balanced-damper","title":"Fluidampr Performance Diesel Damper 1989-1998 Dodge 5.9L Cummins 12V","description":"\u003cp\u003eFluidampr's internally balanced damper for the 1989-1998 Dodge 5.9L Cummins 12 valve replaces the factory harmonic balancer with a viscous unit. Because the damper does not carry the stock timing notches, the Cummins sensor relocation kit is part of the installation on these trucks.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eInternally balanced; no additional crankshaft balancing required.\u003c\/li\u003e\n\u003cli\u003eSensor relocation kit installation is covered by Fluidampr instruction sheet 4NFH.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1989-1998 Dodge Ram 5.9L Cummins\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eCrank bolt torque is 92 ft-lbs with OEM bolts. On 1992-1998 trucks, rotate the engine before removal so the magnetic pickup is not sitting on a notch in the stock damper, and record the pickup gap. Fluidampr recommends High Strength Bolt Kit p\/n 300009 under 700 hp \/ 1,250 ft-lbs, Full Power Kit p\/n 300008 above that, and Drill Pin Kit p\/n 300002 above 3,500 rpm.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 960311\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel with black zinc chromate finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972612269,"sku":"fdr960311","price":756.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/cac55be260647d4f7cb2e62fd6e55793L.jpg?v=1783813267"},{"product_id":"fluidampr-01-18-gm-chevy-6-6l-duramax-internally-balanced-damper-harmonic-balancer","title":"Fluidampr Internal Balance Damper 2001+ GM 6.6L Duramax Crank Swaps","description":"\u003cp\u003eFluidampr p\/n 760131 is the internally balanced Duramax damper, and Fluidampr specifies it for internal balance crankshaft conversions only. It is the one damper in the Fluidampr Duramax range that is not externally balanced, so it belongs on a built 6.6L running an internally balanced aftermarket crankshaft rather than a factory bottom end.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngine balance is internal. Fluidampr lists this damper for internal balance crankshaft conversions only.\u003c\/li\u003e\n\u003cli\u003ePress fit onto an internally balanced Duramax crankshaft, with two keyways (5 mm and 1\/4 in.) that must both be aligned before pressing on.\u003c\/li\u003e\n\u003cli\u003eSupplied with a hardened crankshaft washer machined for the GM 3.200 in. bolt circle, replacing the factory crank bolt washer.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003e7-3\/4 in. outside diameter. SFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2001 and newer GM \/ Chevy 6.6L Duramax\u003c\/li\u003e\n\u003cli\u003eInternal balance crankshaft conversions only\u003c\/li\u003e\n\u003cli\u003eNot for factory Duramax bottom ends, which are externally balanced\u003c\/li\u003e\n\u003cli\u003eEvery other Fluidampr Duramax damper (890101, 830111, 830121, 830141, 830151) is externally balanced\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eConfirm your crankshaft is internally balanced before ordering. Internal and external balance dampers are not interchangeable, and fitting this damper to a factory externally balanced Duramax is a mismatch. Fluidampr developed it for Duramax builds using an internally balanced billet crankshaft such as a Callies unit. Torque an OEM bolt to 74 ft-lbs plus an additional 105 degrees, or 255 ft-lbs with lube when using the ARP 129-2503 crank bolt that Fluidampr recommends.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 760131\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 7-3\/4 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972645037,"sku":"fdr760131","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/4c81e7d0fb83ceb4f4fa6a785e943a6aL.jpg?v=1783813267"},{"product_id":"fluidampr-dodge-cummins-5-9l-1998-2002-24v-steel-internally-balanced-damper","title":"Fluidampr Performance Diesel Damper 1998.5-2002 Dodge 5.9L Cummins 24V","description":"\u003cp\u003eThis internally balanced Fluidampr damper covers the 1998.5-2002 Dodge 5.9L Cummins 24 valve. Viscous silicone and a free-rotating inertia ring handle torsional vibration that a hardening rubber balancer stops controlling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eInternally balanced; no additional crankshaft balancing required.\u003c\/li\u003e\n\u003cli\u003eNever requires tuning, rebuilding or maintenance, unlike a rubber elastomer balancer.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1998.5-2002 Dodge Ram 5.9L Cummins\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eCrank bolt torque is 92 ft-lbs with OEM bolts. Fluidampr recommends High Strength Bolt Kit p\/n 300009 for these engines under 700 hp \/ 1,250 ft-lbs of torque, the Full Power Kit p\/n 300008 above that level, and Drill Pin Kit p\/n 300002 above 3,500 rpm.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 960301\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel with black zinc chromate finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972677805,"sku":"fdr960301","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/b517d81ca2ccea9f56eadb9719d9523fL.jpg?v=1783813268"},{"product_id":"fluidampr-dodge-cummins-6-7l-steel-internally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2007.5+ Dodge Ram 6.7L Cummins","description":"\u003cp\u003eFluidampr's internally balanced damper for the 2007.5 and newer Dodge Ram 6.7L Cummins replaces the stock elastomer balancer with a viscous unit that keeps damping as horsepower goes up. No re-tuning is needed after engine modifications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eInternally balanced; no additional crankshaft balancing required.\u003c\/li\u003e\n\u003cli\u003eNever requires tuning, rebuilding or maintenance, unlike a rubber elastomer balancer.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2007.5 and newer Dodge Ram 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eInternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eInstall the damper with the smaller of the two pin holes on the crankshaft pin and verify crankshaft thread depth for bolt length. Crank bolt torque is 92 ft-lbs with OEM bolts. Fluidampr recommends High Strength Bolt Kit p\/n 300007 under 700 hp \/ 1,250 ft-lbs, and the Cummins Full Power Kit p\/n 300008 above it.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 920321\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: Internal\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel with black zinc chromate finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972710573,"sku":"fdr920321","price":756.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/1dbf5998fdb9cafea109be4acc5f0977L.jpg?v=1783813267"},{"product_id":"fluidampr-2001-chevy-gm-duramax-6-6l-drill-pin-kit","title":"Fluidampr Damper Drill Pin Kit 2001+ Chevy GM 6.6L Duramax","description":"\u003cp\u003eReleased in 2024 for 2001 and newer Chevy and GM 6.6L Duramax applications, this kit adds a positive mechanical engagement point between a Fluidampr damper and the crankshaft. Fluidampr recommends pinning the damper on performance and competition Duramax engines.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCNC machined drill fixture made from heat treated 1018 steel for accurate drilling.\u003c\/li\u003e\n\u003cli\u003eBlack zinc chromate finish with a laser engraved Fluidampr logo.\u003c\/li\u003e\n\u003cli\u003eIncludes a 1\/4 in. high speed steel drill bit and a 7\/8 in. x 1\/4 in. dowel pin.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2001 and newer Chevy \/ GM 6.6L Duramax with a Fluidampr damper\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eThe damper is installed on the crank with a friction washer but without the crank bolt and hardened washer, then the fixture is clocked 180 degrees from the factory key. Press or tap the pin in until it is flush or below flush with the damper face.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300019\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper drill pin kit\u003c\/li\u003e\n\u003cli\u003eIncluded: Drill fixture, 1\/4 in. drill bit, dowel pin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972776109,"sku":"fdr300019","price":76.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/e7c8402767ce131b9963821efebf88d9L.jpg?v=1783813269"},{"product_id":"fluidampr-2020-gm-6-6l-duramax-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2020+ GM 6.6L Duramax L5P Dual Belt","description":"\u003cp\u003eFor 2020 and newer GM 6.6L Duramax L5P trucks, this Fluidampr damper carries a hard coat anodized aluminum fan pulley for the dual belt accessory drive. Viscous damping replaces the factory tuned elastomer element.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual belt configuration with a hard coat anodized aluminum fan pulley in the mounting.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003ePre-drilled 3\/8 in.-24 UNF hole on a 3.200 in. bolt circle for an accessory pulley, custom mandrel drive, or installer and remover tool.\u003c\/li\u003e\n\u003cli\u003eBlack zinc chromate finish, laser engraved with a timing mark and SFI 18.1 credential.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2020 and newer GM \/ Chevy 6.6L Duramax L5P with dual belt accessory drive\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 74 ft-lbs plus an additional 90 degrees with a new torque-to-yield bolt. Fluidampr recommends High Strength Bolt Kit p\/n 300010 for performance applications.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 830151\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003ePulley: Hard coat anodized aluminum fan pulley\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972743341,"sku":"fdr830151","price":822.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/d2ff65c06c40d5d4742b7643a2e255c0L.jpg?v=1783813268"},{"product_id":"fluidampr-03-dodge-cummins-5-9l-6-7l-common-rail-high-strength-bolt-kit","title":"Fluidampr High Strength Bolt Kit 2003+ Dodge Ram 5.9L 6.7L Cummins","description":"\u003cp\u003eThis is the common rail Cummins version of Fluidampr's High Strength Bolt Kit, listed for 2003 and newer 5.9L and 6.7L engines. It supplies the ARP bolts and friction washer used to mount a Fluidampr damper on a modified engine.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat treated, high strength extended length bolts from ARP.\u003c\/li\u003e\n\u003cli\u003eIncludes a 0.010 in. thick diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eFor applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003 and newer Dodge Ram 5.9L and 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eApplications up to 700 hp \/ 1,250 ft-lbs of torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eCummins engines above 700 hp \/ 1,250 ft-lbs of torque must use the Fluidampr Cummins Full Power Kit, p\/n 300008, instead. Replacement friction washers are p\/n 960341-FW01 (1 pc) and 960341-FW03 (3 pc).\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300007\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972907181,"sku":"fdr300007","price":166.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/bbcbac3d2a6813563d633b45bed5df09L.jpg?v=1783813266"},{"product_id":"fluidampr-89-dodge-cummins-5-9l-6-7l-full-power-kit","title":"Fluidampr Cummins Full Power Kit 1989+ Dodge Ram 5.9L 6.7L","description":"\u003cp\u003eThe Cummins Full Power Kit is Fluidampr's damper mounting solution for 1989 and newer 5.9L and 6.7L builds making more than 700 hp \/ 1,250 ft-lbs of torque. A thick torque plate spreads clamping load across the damper face, which is why Fluidampr recommends it for drag racing and sled pulling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/2 in. thick torque plate with a textured finish mounts between the damper face and the bolts for a wider, stronger clamping surface.\u003c\/li\u003e\n\u003cli\u003eTorque plate incorporates a 5\/8 in. hex head that doubles as a barring tool for turning the engine over by hand.\u003c\/li\u003e\n\u003cli\u003eIncludes heat treated, high strength extended length ARP bolts and a diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eFluidampr instructions cover its use with damper part numbers 920301, 920321, 960301, 960311 and 960341.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1989 and newer Dodge Ram 5.9L and 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eEngine builds above 700 hp \/ 1,250 ft-lbs of torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eTorque the plate bolts to 125 ft-lbs; Fluidampr does not recommend using an impact wrench. Use with the Cummins Drill Pin Kit, p\/n 300002, on applications above 3,500 rpm, and check damper to timing cover clearance after installation.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300008\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003cli\u003eBolt Torque: 125 ft-lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972939949,"sku":"fdr300008","price":271.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/e0f6e0cc042a66a52e190656cd395ffdL.jpg?v=1783813269"},{"product_id":"fluidampr-89-02-dodge-cummins-5-9l-12v-24v-high-strength-bolt-kit","title":"Fluidampr High Strength Bolt Kit 1989-2002 Dodge 5.9L Cummins 12V 24V","description":"\u003cp\u003eFluidampr lists this High Strength Bolt Kit for 1989-2002 Dodge 5.9L Cummins 12 valve and 24 valve engines running a Fluidampr damper with a 0.350 in. flange thickness. It combines ARP hardware with a diamond impregnated friction washer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat treated, high strength extended length bolts from ARP.\u003c\/li\u003e\n\u003cli\u003eIncludes a 0.010 in. thick diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eFor applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1989-2002 Dodge Ram 5.9L Cummins, 12 valve and 24 valve\u003c\/li\u003e\n\u003cli\u003eFluidampr dampers with 0.350 in. flange thickness\u003c\/li\u003e\n\u003cli\u003eApplications up to 700 hp \/ 1,250 ft-lbs of torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFluidampr asks that you contact its tech service if you need help identifying which damper flange type you have. Cummins engines above 700 hp \/ 1,250 ft-lbs of torque must use the Cummins Full Power Kit, p\/n 300008.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300009\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819972972717,"sku":"fdr300009","price":166.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/163ac0bd92b872112b498bf9cbfa57ccL.jpg?v=1783813268"},{"product_id":"fluidampr-01-gm-duramax-6-6l-high-strength-bolt-kit","title":"Fluidampr High Strength Bolt Kit 2001+ GM 6.6L Duramax","description":"\u003cp\u003eThe Duramax High Strength Bolt Kit replaces the factory torque-to-yield crank bolt with ARP hardware for better clamp load and retention on a Fluidampr damper. Fluidampr recommends it for 6.6L Duramax builds around 500 hp and above.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat treated, high strength extended length bolt from ARP.\u003c\/li\u003e\n\u003cli\u003eIncludes the diamond impregnated friction washer that improves surface engagement between damper and crankshaft.\u003c\/li\u003e\n\u003cli\u003eReplaces the one-time-use OE torque-to-yield crank bolt.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2001 and newer GM \/ Chevy 6.6L Duramax\u003c\/li\u003e\n\u003cli\u003eRecommended for builds around 500 hp and above\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eClean and inspect crankshaft threads, lubricate as directed in the Fluidampr instructions, and use a calibrated torque wrench rather than impact tools. Replacement friction washers are p\/n 760131-FW01 (1 pc) and 760131-FW03 (3 pc).\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300010\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973005485,"sku":"fdr300010","price":104.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/45a88eb642f4cfd0424f88a230b2e2dfL.jpg?v=1783813270"},{"product_id":"fluidampr-ford-powerstroke-7-3l-late-1999-2003-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 1999-2003 Ford 7.3L Power Stroke","description":"\u003cp\u003eThis is the late-style Fluidampr Performance Diesel Series damper for 1999-2003 Ford 7.3L Power Stroke engines. The viscous damper replaces the aging factory elastomer balancer and controls torsional vibration across the whole RPM range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eExternally balanced to OEM specification; no additional balancing required.\u003c\/li\u003e\n\u003cli\u003eNever requires tuning, rebuilding or maintenance, unlike a rubber elastomer balancer.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1999-2003 Ford 7.3L Power Stroke\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 212 ft-lbs. Fluidampr recommends replacing the crank bolt whenever the damper is installed.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 720211\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel with black zinc chromate finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973038253,"sku":"fdr720211","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/efa39c864d3535a47ef0ab92241a253eL.jpg?v=1783813270"},{"product_id":"fluidampr-89-dodge-ram-5-9l-6-7l-cummins-harmonic-balancer-friction-washer-1pc","title":"Fluidampr Damper Friction Washer 1pc 1989+ Dodge Ram 5.9L 6.7L Cummins","description":"\u003cp\u003eThis 0.010 in. diamond impregnated friction washer seats between a Fluidampr damper and the Cummins crankshaft to keep the mating surface secure. Sold as a single washer for 1989+ Dodge Ram 5.9L 6.7L Cummins applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a single washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1989 and newer Dodge Ram 5.9L and 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eUsed with the Fluidampr Cummins High Strength Bolt Kits and the Cummins Full Power Kit p\/n 300008\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 960341-FW01\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973071021,"sku":"fdr960341-FW01","price":63.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/0a626efb2258fd043f69151b67c27583L.jpg?v=1783813266"},{"product_id":"fluidampr-ford-powerstroke-7-3l-early-1994-1997-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 1994-1997 Ford 7.3L Power Stroke","description":"\u003cp\u003eThe early-style Fluidampr damper for 1994-1997 Ford 7.3L Power Stroke engines ships with the fan spacer required for that application. It is an externally balanced viscous damper that replaces the factory harmonic balancer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncludes the fan spacer needed on 1994-1997 7.3L installations, with its own Fluidampr instruction sheet.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eExternally balanced to OEM specification; no additional balancing required.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1994-1997 Ford 7.3L Power Stroke\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 212 ft-lbs. Fan spacer installation is covered by Fluidampr instruction sheet 4NFJ.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 720221\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eIncluded: Fan spacer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973103789,"sku":"fdr720221","price":730.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/8427c79d86269abacd99205733d030a1L.jpg?v=1783813267"},{"product_id":"fluidampr-6-2l-6-5l-gm-diesel-1982-1993-mechanical-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 1982-1993 GM 6.2L 6.5L Diesel","description":"\u003cp\u003eThis is the earlier GM diesel application in the Fluidampr Performance Diesel Series, covering 1982-1993 GM 6.2L and 6.5L engines. A spacer is supplied and must be used with the damper.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShips with the spacer required for this application.\u003c\/li\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eExternally balanced to OEM specification; no additional balancing required.\u003c\/li\u003e\n\u003cli\u003e8 in. outside diameter, 18 lbs total weight with 12.1 lbs rotating weight.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1982-1993 GM 6.2L and 6.5L diesel\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eThe included spacer must be used. Fluidampr directs installers to the vehicle owners manual for crank bolt torque on this application.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800191\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eIncluded: Spacer\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973136557,"sku":"fdr800191","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/e6085261c118957e8a2362706ce70563L.jpg?v=1783813269"},{"product_id":"fluidampr-6-6l-gm-duramax-2006-2008-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2006-2010 GM 6.6L Duramax LBZ LMM","description":"\u003cp\u003eCovering the 2006-2010 GM 6.6L Duramax LBZ and LMM, this externally balanced Fluidampr damper controls crankshaft torsional vibration with viscous silicone rather than a tuned rubber ring. Cracked or bulging rubber on a factory balancer is the usual reason owners make the swap.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eIncludes the hardened crankshaft washer with clearance for the GM 3.200 in. bolt circle.\u003c\/li\u003e\n\u003cli\u003e8-3\/8 in. outside diameter, 25 lbs total weight with 16.8 lbs rotating weight.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2006-2010 GM \/ Chevy 6.6L Duramax LBZ and LMM\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 74 ft-lbs plus an additional 105 degrees, using a new torque-to-yield bolt. Fluidampr recommends High Strength Bolt Kit p\/n 300010 for builds around 500 hp and above.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 830111\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8-3\/8 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 25 lbs (16.8 lbs rotating)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973169325,"sku":"fdr830111","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/629fb4f63f575bc2aea61f5c35fa5d33L.jpg?v=1783813269"},{"product_id":"fluidampr-6-2l-6-5l-gm-diesel-1994-2000-electronic-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 1994-2000 GM 6.2L 6.5L Diesel","description":"\u003cp\u003eFluidampr lists p\/n 800141 for 1994-2000 GM and Hummer 6.2L and 6.5L diesel engines. The viscous damper takes over from the factory elastomer balancer, which loses effectiveness as the rubber ages.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eExternally balanced to OEM specification; no additional balancing required.\u003c\/li\u003e\n\u003cli\u003e8 in. outside diameter, 18 lbs total weight with 12.1 lbs rotating weight.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1994-2000 GM and Hummer 6.2L and 6.5L diesel\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFluidampr directs installers to the vehicle owners manual for crank bolt torque on this application. Always fit a new crank bolt.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800141\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8 in.\u003c\/li\u003e\n\u003cli\u003eWeight: 18 lbs (12.1 lbs rotating)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973202093,"sku":"fdr800141","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/846bcfeb61a1a972c31661b7d51d4aa2L.jpg?v=1783813270"},{"product_id":"fluidampr-dodge-cummins-sensor-relocation-kit-for-92-98-12v-trucks","title":"Fluidampr Sensor Relocation Kit 1992-1998 Dodge 5.9L Cummins 12V","description":"\u003cp\u003eInstalling a Fluidampr damper on a 1992-1998 Dodge 5.9L Cummins 12 valve requires relocating the engine speed sensor, since the viscous damper does not carry the factory pickup notches. This kit supplies the parts and instructions for that step.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRelocates the engine speed sensor for Fluidampr damper installations on 12 valve trucks.\u003c\/li\u003e\n\u003cli\u003eIncludes hardware, pigtails and detailed instructions.\u003c\/li\u003e\n\u003cli\u003eCovered by Fluidampr instruction sheet 4NFH.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1992-1998 Dodge Ram 5.9L Cummins 12 valve running a Fluidampr damper\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eThis kit is already included with the Fluidampr 960311 damper, so it is normally ordered only as a replacement or for a truck where the original kit is missing.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300003\u003c\/li\u003e\n\u003cli\u003eProduct Type: Sensor relocation kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973267629,"sku":"fdr300003","price":79.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/3b8ccc358cccc9aedd2abe20a3358e9bL.jpg?v=1783813267"},{"product_id":"fluidampr-03-07-ford-powerstroke-6-0l-high-strength-bolt-kit","title":"Fluidampr High Strength Bolt Kit 2003-2007 Ford 6.0L Power Stroke","description":"\u003cp\u003eFluidampr recommends this High Strength Bolt Kit when installing a damper on a modified 2003-2007 Ford 6.0L Power Stroke. It pairs heat treated ARP hardware with the diamond impregnated friction washer that improves the clamp between damper and crankshaft.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat treated, high strength extended length bolt from ARP.\u003c\/li\u003e\n\u003cli\u003eIncludes a 0.010 in. thick diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eRated by Fluidampr for applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested with leading Ultimate Callout Challenge competitors.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003-2007 Ford 6.0L Power Stroke\u003c\/li\u003e\n\u003cli\u003eApplications up to 700 hp \/ 1,250 ft-lbs of torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFluidampr recommends replacing the friction washer every time the damper is removed; single and three packs are available separately under p\/n 870201-FW01 and 870201-FW03.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300014\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973300397,"sku":"fdr300014","price":166.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/74ae290f37c1ce24a0c120ff5bcca0f3L.jpg?v=1783813267"},{"product_id":"fluidampr-2001-gm-chevy-6-6l-duramax-harmonic-balancer-friction-washer-1pc","title":"Fluidampr Damper Friction Washer 1pc 2001+ GM 6.6L Duramax","description":"\u003cp\u003eThe diamond impregnated friction washer improves surface engagement between a Fluidampr damper and the Duramax crankshaft. Fluidampr recommends replacing it each time the damper is removed, and this is the single piece version for 2001+ GM 6.6L Duramax applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a single washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2001 and newer GM \/ Chevy 6.6L Duramax\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr Duramax dampers and High Strength Bolt Kit p\/n 300010\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 760131-FW01\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973333165,"sku":"fdr760131-FW01","price":63.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/34dd06a69b78cf800c7867e9d71cc994L.jpg?v=1783813268"},{"product_id":"fluidampr-11-ford-6-7l-powerstroke-diesel-damper","title":"Fluidampr Performance Diesel Damper 2011+ Ford 6.7L Power Stroke","description":"\u003cp\u003eFluidampr's Performance Diesel Series damper for the 2011 and newer Ford 6.7L Power Stroke controls crankshaft torsional vibration with viscous silicone instead of the factory rubber element. Fluidampr lists it as externally balanced for 2011 to present 6.7L applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eDamping stays effective as power levels climb, with no tuning or rebuild interval.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSteel construction, 8 in. outside diameter.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011 and newer Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 22 ft-lbs plus an additional 90 degrees; the bolt is torque-to-yield and must be replaced. The 6.7L Power Stroke High Strength Bolt Kit, p\/n 300016, is recommended for applications up to 700 hp \/ 1,250 ft-lbs of torque. In May 2026 Fluidampr released an updated 6.7L Power Stroke damper, p\/n 800241, which supersedes p\/n 800221.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800221\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973365933,"sku":"fdr800221","price":730.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/36db6c99cfd1a01b3263d2243e1a9ad8L.jpg?v=1783813268"},{"product_id":"fluidampr-ford-powerstroke-6-4l-harmonic-balancer-friction-washer-1pc","title":"Fluidampr Damper Friction Washer 1pc 2008-2010 Ford 6.4L Power Stroke","description":"\u003cp\u003eFluidampr calls for a fresh diamond impregnated friction washer every time the damper comes off the crankshaft. This is the single 0.010 in. washer for 2008-2010 Ford 6.4L Power Stroke damper installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.010 in. thick, diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eEnsures a secure mating surface between the damper and the crankshaft.\u003c\/li\u003e\n\u003cli\u003eFluidampr recommends a new washer every time the damper is removed.\u003c\/li\u003e\n\u003cli\u003eSupplied as a single washer pack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008-2010 Ford 6.4L Power Stroke\u003c\/li\u003e\n\u003cli\u003eUsed with Fluidampr damper p\/n 800211 and High Strength Bolt Kit p\/n 300015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOne washer is used per damper installation. This washer is the same part supplied in the matching Fluidampr High Strength Bolt Kit, and is offered separately so it can be replaced on its own.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800211-FW01\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper friction washer\u003c\/li\u003e\n\u003cli\u003eThickness: 0.010 in.\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973398701,"sku":"fdr800211-FW01","price":63.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/0d8ae22ba96f89dcb343b8573cecf16cL.jpg?v=1783813268"},{"product_id":"fluidampr-11-18-ford-powerstorke-6-7l-high-strength-bolt-kit","title":"Fluidampr High Strength Bolt Kit 2011+ Ford 6.7L Power Stroke","description":"\u003cp\u003eFluidampr's High Strength Bolt Kit for the 2011 and newer Ford 6.7L Power Stroke supplies the ARP bolt and diamond impregnated friction washer used when mounting a Fluidampr damper on a modified engine.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat treated, high strength extended length bolt from ARP.\u003c\/li\u003e\n\u003cli\u003eIncludes a 0.010 in. thick diamond impregnated friction washer for a secure mating surface.\u003c\/li\u003e\n\u003cli\u003eRated by Fluidampr for applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011 and newer Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003cli\u003eApplications up to 700 hp \/ 1,250 ft-lbs of torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eReplacement friction washers for this application are p\/n 800221-FW01 (1 pc) and 800221-FW03 (3 pc). Fluidampr recommends rechecking bolt torque after every run or pull on 750 hp and higher builds.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300016\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973431469,"sku":"fdr300016","price":166.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/0a75e2facfd2163e447af396c25959c0L.jpg?v=1783813268"},{"product_id":"fluidampr-08-10-ford-6-4l-powerstroke-diesel-damper","title":"Fluidampr Performance Diesel Damper 2008-2010 Ford 6.4L Power Stroke","description":"\u003cp\u003eThis externally balanced Fluidampr damper fits 2008-2010 Ford 6.4L Power Stroke engines and takes over crankshaft torsional vibration control from the factory elastomer balancer. Damping is broad-range rather than tuned to one narrow frequency band.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eProtection across the entire RPM range, with no re-tuning needed as the engine is modified.\u003c\/li\u003e\n\u003cli\u003eExternally balanced to OEM specification; no additional balancing required.\u003c\/li\u003e\n\u003cli\u003eCNC machined, computer balanced high-grade steel with a corrosion resistant black zinc chromate finish.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008-2010 Ford 6.4L Power Stroke\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 50 ft-lbs plus an additional 90 degrees. The bolt is torque-to-yield and a new bolt must be used. Fluidampr recommends the 6.4L High Strength Bolt Kit, p\/n 300015, for applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 800211\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel with black zinc chromate finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973464237,"sku":"fdr800211","price":756.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/fdabafa71925c88136c4e759caf22b13L.jpg?v=1783813269"},{"product_id":"fluidampr-11-chevy-gm-6-6l-duramax-diesel-damper","title":"Fluidampr Performance Diesel Damper 2010.5-2016 GM 6.6L Duramax LML","description":"\u003cp\u003eThis Fluidampr Performance Diesel Series damper is listed by the manufacturer for 2010.5-2016 GM 6.6L Duramax LML and LGH engines. The viscous design protects the crankshaft, main bearings and timing gear across the entire RPM range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003eIncludes the hardened crankshaft washer with clearance for the GM 3.200 in. bolt circle.\u003c\/li\u003e\n\u003cli\u003e8-3\/8 in. outside diameter, 25 lbs total weight.\u003c\/li\u003e\n\u003cli\u003eNever requires tuning, rebuilding or maintenance, unlike a rubber elastomer balancer.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2010.5-2016 GM \/ Chevy 6.6L Duramax LML and LGH\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 74 ft-lbs plus an additional 90 degrees with a new torque-to-yield bolt. High Strength Bolt Kit p\/n 300010 is recommended for builds around 500 hp and above.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 830121\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 8-3\/8 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973497005,"sku":"fdr830121","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/0b79aa53d6fbc5f2eb69b6d602da7b64L.jpg?v=1783813269"},{"product_id":"fluidampr-17-19-gm-6-6l-duramax-steel-externally-balanced-damper","title":"Fluidampr Performance Diesel Damper 2017-2019 GM 6.6L Duramax L5P","description":"\u003cp\u003eReleased for the 2017-2019 GM 6.6L Duramax L5P, this Fluidampr damper draws on the same design work behind Duramax L5P dampers used in high performance light tactical vehicles. It is externally balanced and pre-drilled for accessory or mandrel drives.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eViscous design uses a free-rotating inertia ring sealed inside a laser-welded steel housing, shearing through silicone to convert crankshaft torsional vibration into heat.\u003c\/li\u003e\n\u003cli\u003ePre-drilled 3\/8 in.-24 UNF hole on a 3.200 in. bolt circle for an accessory pulley, custom mandrel drive, or damper installer and remover tool.\u003c\/li\u003e\n\u003cli\u003eBlack zinc chromate finish, laser engraved with a timing mark, the Fluidampr Made in the USA logo and the SFI 18.1 credential.\u003c\/li\u003e\n\u003cli\u003eIncludes the hardened crankshaft washer for the GM 3.200 in. bolt circle.\u003c\/li\u003e\n\u003cli\u003eSFI 18.1 certified and made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2017-2019 GM \/ Chevy 6.6L Duramax L5P\u003c\/li\u003e\n\u003cli\u003eExternal balance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eOEM crank bolt torque is 74 ft-lbs plus an additional 90 degrees with a new torque-to-yield bolt. Fluidampr recommends High Strength Bolt Kit p\/n 300010 for proper installation in performance applications.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 830141\u003c\/li\u003e\n\u003cli\u003eProduct Type: Crankshaft damper (harmonic balancer)\u003c\/li\u003e\n\u003cli\u003eEngine Balance: External\u003c\/li\u003e\n\u003cli\u003eBolt Pattern: 3\/8 in.-24 on 3.200 in. bolt circle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973529773,"sku":"fdr830141","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/388305f737aba17090d778e56dc52d44L.jpg?v=1783813267"},{"product_id":"fluidampr-08-10-ford-powerstroke-6-4l-high-strength-bolt-kit","title":"Fluidampr High Strength Bolt Kit 2008-2010 Ford 6.4L Power Stroke","description":"\u003cp\u003eThis installation kit covers the crank bolt and friction washer for a Fluidampr damper on the 2008-2010 Ford 6.4L Power Stroke. The factory damper bolt is torque-to-yield and should not be reused.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeat treated, high strength extended length bolt from ARP.\u003c\/li\u003e\n\u003cli\u003eIncludes a 0.010 in. thick diamond impregnated friction washer.\u003c\/li\u003e\n\u003cli\u003eRated by Fluidampr for applications up to 700 hp \/ 1,250 ft-lbs of torque.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2008-2010 Ford 6.4L Power Stroke\u003c\/li\u003e\n\u003cli\u003eApplications up to 700 hp \/ 1,250 ft-lbs of torque\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eFluidampr recommends a fresh friction washer each time the damper comes off. Replacement washers for this application are p\/n 800211-FW01 (1 pc) and 800211-FW03 (3 pc).\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Fluidampr\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 300015\u003c\/li\u003e\n\u003cli\u003eProduct Type: Damper installation hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":46819973595309,"sku":"fdr300015","price":166.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/files\/ddc4849fafd4864048d2b7a27b57da61L.jpg?v=1783813269"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/5200\/0173\/collections\/Fluidampr_Logo.png?v=1788887665","url":"https:\/\/www.dfispdx.com\/collections\/fluidampr.oembed","provider":"Diesel Fuel Injection Service","version":"1.0","type":"link"}